Awning Fabrics Sunworker


Architectural Roof System
Folding Arm
Pivot Arm

Dickson's Sunworker solar-protective fabric preserves privacy while maintaining full visibility towards the outside, allowing the comfort of quality and natural light to be enjoyed.

Its highly regular, perforated micro-structure allows the fabric to act as a genuine heat filter. It repels up to 92% of the warmth of the sun's rays, preventing overheating in summer and maintaining heat in the winter.

The plastisol coating has high resistance to harsh weather conditions, dirt markings and is fire retardant.

The "heart" of Sunworker is made up of a high-strength polyester core, while the distinctive Rachel Trameur-style weaving method used in its manufacturing gives it outstanding resistance to bad weather. This technique allows the yarns to move in relation to each other in order to spread, transmit and absorb mechanical energy in the event of tearing.

Technical Specifications

Composition 100% High Tenacity Polyester
Weight 330gsm
Width 3000mm
Weave Rachel Trameur
Coating PVC both sides
Thickness 0.4mm
Openness 6%
Colour Fastness Outdoor 3-4/5
Flame Retardant Tested to AS1530.2 +3 / M2
Warranty 5 year
Made in France
Care and Cleaning A regular yearly check visually for cuts or tears on the edges, inside the canvas, on the joints or on the seams is necessary to look out for and remove any vegetal or animal deposits. The fabric should be cleaned every two years. Unroll the fabric completely and remove the dust with a soft, non-metallic brush or with a vacuum cleaner. Then wash the fabric using soapy water with a dilution of 10 % and at 20°C temperature. Rinse thoroughly with clean water. Repeat the operation if necessary. Let it dry in the open air and roll up the fabric once dry.